Available in 2 versions, one for SLC and another for MLC memory, NAND Flash Controller is architected to handle raw error bit rates as NAND memory migrates to finer process geometries. It processes information contained in Extended ECC Information data

Used to future-proof CE platforms, Secure Digital eXtended Capacity (SDXC)/SDIO 3.0/eMMC 4.4 Host Controller IP lets SoC designers tailor memory subsystem to functional requirements of platforms. It integrates 3 memory specifications into one IP core and promotes data security while

Targeted at SFP+ Ethernet and Fibre Channel applications, MAX3799 delivers up to 14 Gbps performance while consuming 320 mW. Device offers programmable receive functions such as data rate; LOS threshold, squelch, and polarity; CML output level; and signal-path polarity. Programmable

Offering ±10% accurate current limit that can be programmed from 250-1,500 mA with external resistor, MAX14523A/MAX14523B/MAX14523C protect host devices against damage caused by faulty load conditions, and provide reverse-current blocking to prevent current from being dumped back into source. Low

Designed to mount SFP transceivers, right-angle SMT SFP/SMA Connector consists of bottom plate with 20-pin, surface mount contact unit; high temperature-resistant plastic insulation cover in accordance with UL94 V-0; and cage, which is mounted on PCB using 8 press-fit connections.

Models MAX9617 and MAX9618 zero-drift, rail-to-rail operational amplifiers are packaged in 6-pin SC70 and 8-pin SC70 packages, respectively. They feature 10 µV input-offset voltage, input-voltage noise of 1 µVP-P from 0.1-10 Hz, as well as 5 nV/°C input-offset-voltage drift. Consuming

As embedded controller for chamber applications, fanless ARK-3202 is powered by Intel® ATOM(TM) CPU and supplied in rugged chassis. I/O interfaces - DVI and VGA dual displays, mic in, line out, dual Giga LAN, optional 8-bit DIO, USB 2.0, GPS,

Measuring 3.68 x 1.815 x 0.35 in., Model RTC-3000 can operate virtually any small brushed or brushless DC servo. Stand-alone system includes controller, amplifier, logic power supplies, and program interpreter with 32 k program memory and 32 k data storage.

Offering 512 bytes or 1 KB in-system programmable flash, 6-pin tinyAVR® MCU models ATtiny4/5/9 process up to 12 MIPS at 12 MHz to reduce time in active mode and increase time in sleep modes. Pin- and code-compatible products facilitate migration

Suited for smart phones, portable media players, and other portable electronic communications devices, Capacitive Touch Panel Controller can track up to 45 simultaneous touch points without ghost points. Unit offers 500 dpi resolution for jitter-free smooth tracking; hover rejection and

Supporting 3.5 and/or 2.5 in. 2 TB hard drives, Synology DS210j/DS410j respectively feature 3/2 USB ports and support up to 4/8 TB storage. Each is powered by 800 MHz CPU and features 128 MB DDRII RAM and one Gigabit LAN

Intended for enterprise and data center applications, dual-rate AFCT-701SDDZ 10GBASE-Long Range single-mode and AFBR-703SDDZ 10GBASE-Short Range multimode fiber transceivers promote flexibility in data rate control via hardware or software control. Both can be operated at 10 or 1 Gbps within

Traveling wave amplifier (TWA), AMMC-5025, suits high-speed digital communications applications that operate in 30 kHz to 80 GHz frequency band. Along with 8 dB signal gain and ±0.7 dB gain flatness, it offers better than 10 dB I/O return loss.

Optimized for accelerated transfer (625 MBps) and storage of Hi-Res graphics, digital A/V content, and other important data, DriveStation HD-HXU3 works with all USB 2.0-enabled computers/notebooks as well as USB 3.0 models. Available capacities include 1.0, 1.5, and 2.0 TB,

Operating from 4-5.5 V supply, N- and S-pole sensing Hall-sensor series S-5721A/22A/23A are laid out in CMOS with Push-Pull or N-Ch-Open-Drain Output. Detection frequency of 7.6 kHz corresponds to 0.132 ms detection period and current consumption of 0.95 mA in

ESPRIT® emphasizes use of milling/turning in any combination and on any type of machine tool. FreeForm 5-axis composite machining cycle lets users independently define machining patterns and tool orientation strategies to be used when creating simultaneous 5-axis tool path. It

SEMiXBOX is IGBT-based modular power assembly that allows for different variations with 1- or 3-phase inverter, rectifier, and chopper, providing any required topology up to 180 A. Consisting of 1 or 2 main box sections, it is composed of SEMiX

Semistack power electronics platform with SKiiP intelligent power modules allows users to connect stacks in parallel, supporting applications from 450 kW for solar to 2.5 MW for wind power. System's 3 half bridge phase modules are arranged in vertical configuration,

Model TC08 valves measure 16.8 mm wide and offer flow of 600 L/min and TC15 units measure 21 mm wide and provide 1,100 L/min flow. Double 3/2-way functions enable full nominal flow on all valves, even during simultaneous operation, and

SEMITRANS 2, with 34 mm wide case, and SEMITRANS 3 and 4 modules, measuring 62 mm wide, are 1,200 V modules for use in AC/DC converters in 20-300 kW power range. Available with V-IGBT chips, units offer rated current of